Configuring your laptop

In order to use the Laptop IP Service ports, you will need the following:

  • A laptop computer
  • 10-Base-T Cable
  • Ethernet Adapter

Wireless Access

Wireless network access is available in many locations on campus, including Fudan University Science Library. See Wireless Networking at Fudan for more information and a list of locations with coverage maps . Users must configure the network for access as below.

Follow the steps listed below to configure your computer to use Laptop IP Service ports.

1  Click on the Start button, point to Settings, then select Control Panel . From within the Control Panel , double-click on the Network icon.

2  Select the TCP/IP adapter representing your Ethernet card, and click on the Properties icon.

3  Finish the IP settings as follows

  • IP address: 10.55.180.*( *means 1~255.)
  • Subnet mask: 255.255.255.0
  • Default Gateway: 10.55.180.1

4. Click OK.

Using the fixed LAN ports

1 Network jacks are available for laptop use in the following rooms of the Arts Library.

Please finish the IP settings as follows

   • IP address: 10.55.180.*( *means 1~255.)
   • Subnet mask: 255.255.255.0
   • DNS : 202.120.224. 6
   • Default Gateway: 10.55.180.1

2 The Science Library

  • IP address: 10.55.170.*( *means 1~255.)
  • Subnet mask: 255.255.255.0
  • DNS : 202.120.224. 6
  • Default Gateway: 10.55.170.1

Check for availability in other libraries at the library's Information Desk.